抓logmemory步骤工具保留所有权利.pdfVIP

▪ Engineer Mode setting – Press *# #: Device-Set UART-UART Setting – Select “UART *” in “TST-PS Config” and “TST-L1 Config” – Select the highest baud rate (e.g., 921600.) ▪ Step1: Click “Logging Mode” button 1 ▪ Setp2: Select the DataBase file 2 ▪ Step 3: Select port and baud rate 3 ▪ Step 4: Click “Connect” button 4 ▪ Step 5: Click “Default Filter” button, and then select the appropriate filter in the “Default Filter List” dialog. 5 You should be able to start logging. ▪ Step 6: Click “Disconnect” button, and then choose “Save Log” to save the log file. 6 ▪ Enter EM mode (Press *# #: Device-Set UART-UART Setting) – Select “USB Port *” in “TST-PS Config” and “TST-L1 Config” • Choose the USB port with the biggest port number. – E.g., If composite USB device is used, choose “USB Port 2”. Otherwise, choose “USB Port”. Composite USB device Not composite USB device ▪ Steps of using USB logging is the same as UART logging except: – You can skip step 3: • Catcher would use the default option “USB Auto Connect”. • Catcher would connect the USB port with the biggest port number automatically. ▪ For Smart Phone MD logging, Catcher supports – UART logging • Modem logs are sent to PC via UART on MD side. However, the throughput is not enough for logging both L1 and PS. – SD logging • Modem logs are se