Cherub小天使EQ均衡器GT 1 GT 2 Installation Guide说明书用户手册.pdf

C-7OVE GT-1/GT-2 Installation Guide MUusical More Scientifcand More forYO 山 Step 1: Maximum Low Eto High E string spacing at saddle: Step 人 4 Insert the tip side of pickup wire 6900 into the hole in the saddle slot， 2.5 (63.5mm). and connect it to the preamp, then lay flat in the saddle slot. Install the saddle after reducing its height by 1.9mm. OOOOO 2.5” | (63.5mm) | maximum Stepb 5: connectthe preamp by inserting the 4-pin connector into the 4-pin receptacle on the battery box. Install the preamp and battery box with screws. OO OOCGO O 各 生 忆 也 T 业 Step 3: choosea compatible location for both the preamp and the battery box before cutting out cavity on side of guitar_ Put the templates of the preamp and the battery box on the location that you select and then cut out the cavity on guitar Drill a pilot hole for the screw holes. Note: Please download the preamp and the battery box cut-out templates of GT-1TGT-2 from ， Step 6 : Choose a compatible location forAluminum cable ties, fix the cables inside the guitar. [ 1 ] 区 [ 2 ]