三菱 GT Works3 增强型驱动控制 （Servo） 项目数据手册GOT2000附加许可证（屏幕详细信息） EN.pdf

GT Works3 Add-on License for GOT2000 Enhanced Drive Control (Servo) Project Data Manual (Screen Details) -SW1DND-GTSV-MZ Safety Precautions Always read the precautions before using this product. Also read this manual and the relevant manuals mentioned in this manual carefully, and use the product properly while paying full attention to safety. Note that the precautions in this manual apply only to this product. The safety precautions are divided into the following levels: warnings and cautions. Indicates that incorrect handling may cause hazardous conditions, resulting in WARNING death or severe injury. Indicates that incorrect handling may cause hazardous conditions, resulting in CAUTION minor or moderate injury or property damage. Note that failure to observe CAUTION may lead to a serious accident depending on the circumstances. Make sure to observe both warnings and cautions to ensure personal safety. Ensure that this manual is easily accessible to all users of this product. [Test Operation Precautions] WARNING ● Before testing the operation of a user-created screen (such as turning on or off a bit device, changing the current value of a word device, changing the set value or current value of a timer or counter, and changing the current value of a buffer memory), thoroughly read the manual to fully understand the operating procedure. During the test operation, never change the data of the devices which are used to perform significant operation for the system. Doing so may cause an accident due to a false output or malfunction. [Precautions for Using a Data Storage] WARNING ● Do not remove the SD card from drive A while the SD card is being accessed by the GOT, or the GOT may stop processing for about 20 seconds. During this stop