FANUC发那科 M-410iB-160-300机械维修说明书.pdf

M-410+B/160 M-410+B/300 MECHANICAL UNIT MAINTENANCE MANUAL B-81995EN/05 • Original Instructions Before using the Robot, be sure to read the FANUC Robot Safety Manual (B-80687EN) and understand the content. • No part of this manual may be reproduced in any form. • All specifications and designs are subject to change without notice. The products in this manual are controlled based on Japan’s “Foreign Exchange and Foreign Trade Law”. The export from Japan may be subject to an export license by the government of Japan. Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported. Furthermore, the product may also be controlled by re-export regulations of the United States government. Should you wish to export or re-export these products, please contact FANUC for advice. In this manual we have tried as much as possible to describe all the various matters. However, we cannot describe all the matters which must not be done, or which cannot be done, because there are so many possibilities. Therefore, matters which are not especially described as possible in this manual should be regarded as ”impossible”. B-81995EN/05 PREFACE PREFACE This manual explains the maintenance and connection procedures for the mechanical units of the following robots: Mechanical unit Model name Maximum load Remarks specification No. FANUC Robot M-410iB/160