Epks系统硬件介绍【精选】.ppt

Customers like this because of “IT Battles” … it is now part of DCS !!! Show simple network architecture drawing on NEXT SLIDE (See Jack) Build from the top down! IOTA support hold the IOTA Carrier which holds the IOTA that allows mounting of the IOM. The MTL F660A will mount on an IOTA Carrier and receive power from the Series C Power System. Initially (3Q05), you will not be able to power the C300 and Series C I/O from a PM Power System – this will be addressed in a later release. Remember, the PM Power System supplies: - 24VDC for all IOPs and FTAs - 3.6VDC for IOP memory circuits - 6VAC for LLAI line frequency clock circuit New power system will provide module and field power. Ratings and approvals are the same as the ratings for the current PMIO power supply. Bus bars built into the IOTA carrier provides the most robust power system in the industry. Series C cabinets can support a full compliment of controllers and I/O modules on each side of the cabinet. The power system will not impact the space set aside for the I/O. In some cases you may be able to use one power supply for both sides of the cabinet. High speed on board processor – 333mhz minimum PowerPC running Greenhill OS More function blocks, more tagged objects, Larger SCM’s One connection for redundancy Second controller is identical to first. Series C C300 Backward compatible with existing PM IO used with C200 Connectivity to C200 and Rockwell via FTE Bridge (Profibus, Pulse input, Serial Interface, DeviceNet) Supports PMIO Same I/O as supported with C200 Series C I/O Series A chassis I/O SI, Pulse, Profibus, DNet Supervisory Network ALWAYS FTE – cannot use Cnet GPS Connection (the unidentified plug) will not work in first release. Time sync in first release is at the server level using Network Time Protocol. 3,600 PU’s in C200 (WORK OUT A SCENARIO)! There is no standard products way to complex new Series-C cabinets with existing systems. The issue is really both mechanical and