材料与试验协会 B164-03镍铜合金条材、棒材和线材.PDF

Designation: B 164 – 03 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire1 This standard is issued under the fixed designation B 164; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope E 140 Hardness Conversion Tables for Metals4 2 E 1473 Test Methods for Chemical Analysis of Nickel, 1.1 This specification covers nickel-copper alloys UNS N04400 and N04405* in the form of hot-worked and cold- Cobalt, and High-Temperature Alloys6 worked rod and bar in the conditions shown in Table 1 and 2.2 Military Standards: 7 cold-worked wire in the conditions shown in Table 2. MIL-STD-129 Marking for Shipment and Storage 1.2 The values stated in inch-pound units are to be regarded MIL-STD-271 Nondestructive Testing Requirements for as the standard. The values given in parentheses are for Metals information only. 3. Terminology 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the 3.1 Definitions of