安德里茨设备操作,安装,维修手册.pptVIP

Double sided mechanical seal - Safematic Seal water piping Operation, Installation and Maintenance Manual Slide * F_material3_machine book.ppt 10/2002 KN/Kotka Fiber Preparation Systems delivered with each machine delivery includes also assembly and dimension drawings and part lists Safety instructions - Lifting Mounting of Equipment During Operation the supplier of the screen is only responsible for the assembly of the screen prior to delivery during the mounting, the fastening of the washer installed at the end of the shaft of the electric motor must be taken into account! Check the maximum feed pressure of the screen from the dimensional drawing appended to the instructions Do not use the screen at a temperature higher than notified while the order was being made When the operating temperature exceeds 65?C (prEN563), even short-term surface contact may cause skin burn All original guards of the screen must be appropriately fastened while the screen is running - do not remove them during operation! All maintenance of the screen and its drive motor is forbidden during operation Safety instructions de-aeration of the screen Check the maximum feed pressure of the screen from the dimensional drawing appended to the instructions Do not use the screen at a temperature higher than notified while the order was being made When the operating temperature exceeds 65?C (prEN563), even short-term surface contact may cause skin burn All original guards of the screen must be appropriately fastened while the screen is running - do not remove them during operation! All maintenance of the screen and its drive motor is forbidden during operation, except: lubrication of bearings adjusting sealing water flow and pressure During Operation Safety instructions Use appropriate hoisting equipment when lifting the screen Before maintenance, stop the drive motor and disconnect it fro