Mo电极电火花强化和喷丸复合提高Ti合金微动疲劳抗力.PDF

第 17 卷第 12 期 中国有色金属学报 2007 年 12 月 Vol.17 No.12 The Chinese Journal of Nonferrous Metals Dec. 2007 文章编号：1004-0609(2007)12-2017-06 Mo 电极电火花强化与喷丸复合提高Ti 合金微动疲劳抗力 1 1 1 2 2 任 亮 ，刘道新 ，张晓化 ，田林海 ，唐 宾 (1. 西北工业大学 航空学院，西安 710072 ； 2. 太原理工大学 表面工程研究所，太原 030024) 摘 要：采用 Mo 电极分别在空气和硅油中对Ti811 钛合金表面进行电火花强化处理(ESS)，探讨消除强化层中裂 纹缺陷的途径。将 ESS 与喷丸强化复合，拟使 Ti 合金微动疲劳(FF)抗力得到显著改善。结果表明：Mo 电极在空 气中电火花强化处理 Ti811 钛合金表面后，强化层出现明显的微裂纹缺陷，由此导致其微动疲劳抗力降低。在硅 油中用 Mo 电极电火花处理 Ti811 合金不仅消除了表面裂纹缺陷，而且使钛合金表面具有良好的减摩润滑作用， 显著改善了钛合金基材的耐磨性能；再经喷丸强化处理，使钛合金基材的微动疲劳抗力显著提高。 关键词：钛合金；微动疲劳；电火花表面强化；喷丸；摩擦磨损 中图分类号：TG 115 文献标识码：A Electrospark surface strengthening by Mo electrode and shot peening on improving fretting fatigue resistance of Ti alloy REN Liang1 1 1 2 2 , LIU Dao-xin , ZHANG Xiao-hua , TIAN Lin-hai , TANG Bin (1. School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072, China; 2. Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan 030024, China) Abstract: The surface of Ti811 alloy was treated by electrospark surface strengthening (ESS) with Mo electrode in the air and in the silicone oil environment to explore ways to eliminate the strengthening layer cracks and flaws. ESS was combined shot peening in order to synergistically improve the fretting fatigue (FF) resistance of Ti alloy. The results show that the Ti811 alloy treated by ESS in the air induces the Ti alloy surface cracking, which leads to its fretting fatig