外文翻译基于RFID技术卷烟分拣系统设计.docxVIP

附录 B 参考英文文献Design of a Cigarette Sorting System Based on RFID TechnologyLeizhang, Weixing Su, Kunyuan Hu, Lianbo Ma Key Laboratory of Industrial Informatics Shenyang Institute of Automation, Chinese Academy of Sciences Shenyang 110016, China AbstractThis paper presents a design method to solve the problems of high failure rate and sorting inefficience in the current cigarette sorting system by integrating RFID technology with CAN BUS. Based on the features of high speed of data transmission, real-time and high reliability, CAN BUS intelligent node is designed. RFID technology enhances the speed and efficiency of cigarette identification. Meanwhile, using the LCD touch-screen and MCGS configuration software, the HMI operation is promoted and the visualization of monitoring processing can also be accomplished.Keywords RFID; CAN BUS; configuration software; AVR MCUI.INTRODUCTIONThe cigarette sorting system is the core of the logistics and distribution. Every modern logistics distribution center depends on the sorting technology and it’s method. Constructing an advanced sorting system with effective throughput can not only save tens, hundreds or even tens of millions of cost, but also improve efficiency, significantly reducing the labor intensity of the workers.Traditional cigarette sorting system collects data by barcode with a low-cost, easy to read and reproduce. However, the bar code and optical scanning are easily affected by dust, oil and other pollutions in the sorting field, and traditional data transmission of sorting system is use of RS485 bus with the advantage of multi-node support, far distance and highly receiving sensitivity. RS485 bus constitutes the network of single master. The equipment mutual communication can be achieved by the master node. Thus there are the lower throughput, poor real-time and highly difficulties of communications between slaver nodes. In our work, we introduce RFID technology to replace bar code identification. RFID system is