Aruba WLAN简明配置手册-v1.docx

Aruba WLAN简明配置手册目录目录21.初始化配置31.1.无线控制器初始化配置31.2.恢复出厂设置－无线控制器41.3.恢复出厂设置－Aruba AP42.基本网络参数配置及维护62.1.基本网络参数配置62.2.控制器基本维护操作72.3.管理员帐号管理93.理解Aruba WLAN配置结构框架113.1.基本WLAN服务配置113.2.基于角色的用户策略管理124.配置范例144.1.建立WPA2-PSK服务144.2.建立Portal认证194.3.建立802.1X认证274.4.同一SSID中为不同用户配置不同的权限374.5.设置用户期限384.6.设定区域管理424.7.配置日志服务器484.8.带宽限制48初始化配置无线控制器初始化配置Enter System name [Aruba3400]: Enter VLAN 1 interface IP address [54]: Enter VLAN 1 interface subnet mask []: Enter IP Default gateway [none]: Enter Switch Role, (master|local) [master]: ————————————控制器角色Enter Country code (ISO-3166), ctrl-I for supported list: cn———————控制器所在国家代码，此选项影响You have chosen Country code CN for China (yes|no)?: yes 可用RF channel及功率参数 Enter Time Zone [PST-8:0]: UTC8:0——————————————－时区系统（UTC、PST等）及所在时区Enter Time in UTC [06:07:59]: 6:11:30——————————————所选时区系统的标准时间而不是本地时间，Enter Date (MM/DD/YYYY) [8/14/2011]: 否则控制器的时钟可能就不对了。Enter Password for admin login (up to 32 chars): ******Re-type Password for admin login: ******Enter Password for enable mode (up to 15 chars): ******Re-type Password for enable mode: ******Do you wish to shutdown all the ports (yes|no)? [no]: Current choices are:System name: VLAN 1 interface IP address: 54VLAN 1 interface subnet mask: IP Default gateway: noneSwitch Role: masterCountry code: cnTime Zone: UTC8:0Ports shutdown: noIf you accept the changes the switch will restart!Type ctrl-P to go back and change answer for any questionDo you wish to accept the changes (yes|no)yesCreating configuration... Done.System will now restart!Shutdown processing started恢复出厂设置－无线控制器注意以下两条command的区别：(Aruba3400) #write erase All the configuration will be deleted. Press y to proceed :Write Erase successful(Aruba3400) #(Aruba3400) #write erase allSwitch will be factory defaulted. All the configuration and databases will be deleted. Press y to proceed :(Aruba3400) #(Aruba3400) #(Aruba3400) #reloadDo you really want to reset the system(y/n): ySystem will now restart!write erase只删除配置文件。而write erase all将删除配置文件、控制器内部