AK95(95S）英文服务手册-4.pdf

Calibrations If the result from the deflation speed test is below the limit, check that the cuff hose is correctly connected to the cuff and that the tube is not kinked or squeezed. Otherwise the failure is caused by the BPM module and it must be replaced and sent to Gambro for repair. If the result from the pressure transducer cali- bration test is outside the limits, it indicates that the self-calibration function within the BPM module not is able to adjust the pressure trans- ducer output within limits. Possible causes are pressure transducer or electronic circuits mal- function. The BPM module must then be re- placed and sent to Gambro for repair. AK 95 / AK 95 S Service Manual 6:23 HCEN 9138 Rev. 10.2005 Calibrations This page is intentionally left blank 6:24 AK 95 / AK 95 S Service Manual HCEN 9138 Rev. 10.2005 Spare Parts List AK 95 AK 95 S October 2005 7- Spare Part List Item Denomination Order no. Remarks Spare Part List 10.2005 Contents : Front panel outside 7-1 Front panel inside 7-2 Operators panel 7-3 Blood pump 7-4 Blood pump, Motor unit 7-5 Heparin pump 7-6 Bottom box 7-7