TI 对 TMS320DM6 467 EVM 板的软件系统平台配置说明.pdfVIP

DM6467 EVM Installation 1 DM6467 EVM Installation Build Instructions UBL Getting the Source [1] * Download the flash_utils.tar.gz archive from here . * Extract the archive. UBL source is present inside flash_utils directory. * The directories of particular interest are: src - source code, include - include files and build - contains CCS project and configuration files. Prerequisites * Windows XP host with CCS v 3.3 installed * Perl is also required for building UBL binary (recommended version 5.10). Steps for Building UBL * Open the UBL project in CCS by clicking Project-Open in CCS and selecting the project file ubldavinci.pjt inside build directory. * By default, the UBL build is configured for DM6467 @ 594MHz. To build UBL for DM6467T (alpha EVM), open file ublconfig.cfg present inside build directory and uncomment the line #-d UBL_CONFIG_1GHZ by removing # at the beginning of the line. Save the file and build the project by clicking F7 key in CCS. Assuming UBL project is selected in project window, this will build UBL out file and copy it to tools/util/Image directory. * Open Command Prompt and navigate to directory tools/util * Type makeublrom.bat and press ENTER which will create ublDaVinci.bin * To create AIS file, use command makeUBLbin.exe ublDaVinci.bin * The binaries will be created in tools/util directory. DM6467 EVM Installation 2 U-Boot Getting the Source [2] * Download the tarball from u-boot-git-snapshot.tar.gz P