RHCT模拟考试.docVIP

Troubleshooting and System Maintenance There are five problems on the RHCT part of this section. You have to reconfigure your computer to address all five problems appropriately, within the first hour of your exam. You donn’t know the password of the system.Please change your root’s passwd with “zFX8zT”,then restart to login the system。 Login to the system,and the system may doesn’t have right network config.Please config the right network. use ip with manucafuter (192.168.0.XX,netmask: gateway:54)XX is your stationXX. Use the DNS server ip 54,and there is a server named . Config your computer with NIS client.The Nis Domain is ,and the server is There is a NFS server in the network,the NFS address is /home/student20XX,please config your network and user Nis to login and make sure the user’s home directory use the NFS. Installation and Configuration The Installation and Configuration section is the second part of the Red Hat exam. If youre taking the RHCT, youre allowed 2.0 hours. Exercise:Install Linux with the partitions shown in Table B-1. The sizes shown are minimums. Make sure that the /home directory is configured in a RAID 5 software array with no spare partitions. Leave 1000MB of free, unallocated space on the hard drive. If your system has less available hard drive space, some adjustments may be possible, such as reducing the amount of space allocated to / and /usr to 2000MB each. Table B-1: Required Partitions Filesystem Size /boot 100MB / 4000MB /home 1000MB /var 1000MB /usr 4000MB Once RHEL is installed, youll also want to configure the following: A connection to a local printer Active networking only during working hours (8:00 A.M to 5:00 P.M.) An NIS client, on the biglan NIS domain The automounter, configured to read the CD on the /misc/cd directory Support for IP forwarding, as this computer may be a router in the future Installation of the system-config-boot RPM A Linux kernel, upgraded to the latest requirements Configure a cross-functi