Personal Protective Equipment Overview劳动保护设施审核.doc

Volume 1 Environmental, Health, and Safety Standards Personal Protective Equipment Overview 01.05.06* Revision 3 February 2xxx Page 1 of 7 *Formerly 01.05.06.A Denotes Revision 1. PURPOSE This procedure establishes criteria for use of Personal Protective Equipment (PPE) and gives guidance to assist in identifying PPE requirements as part of a workplace risk assessment. 2. SCOPE This procedure applies to all Xxx employees, contractors, temporary help, or visitors to Xxx facilities. It also applies to Xxx contract personnel and contract employees working at customer sites and supplier sites. 3. summary ( Sites must conduct a risk assessment and define PPE requirements for specific tasks, activities, and locations/areas. ( PPE is the last consideration in the hierarchy of protection of employees where other protective measures (such as engineering and administrative controls) have been implemented and a workplace risk still remains. ( Specify and use PPE in accordance with this procedure, the referenced procedures, any additional country-specific requirements, and the manufacturers instructions. 4. procedure 4.1 Responsibilities 4.1.1 Site management is responsible to ensure the following: ? Workplace risk assessment is completed. ? All personnel are trained and use PPE when required. ? Adequate supply and various sizes of PPE are available and that PPE is properly maintained. 4.1.2 Site personnel are responsible for Wearing suitable, proper-fitting PPE as determined through a workplace risk assessment Maintaining PPE. ( Informally evaluating tasks and areas during the course of their work activities and applying the principles associated with this standard to all work situations. 4.2 Workplace Risk Assessment 4.2.1 Risk assessments identify any need for PPE. A site survey and review of all the workplace assessments will be carried out to determine the tasks and the areas of plants which require PPE. 4.2.2 Assessment Method The following method(s)