TP-WI-FI UPNP DLNA 测试方法.doc

WI-FI, UpNp, DLNA, Samba Functional Test Procedure, DOC. No. REV DESCRIPTION ECO # REVISED CHECKED APPROVED DATE 0.1 First release 2009.10.26 Area(s) Used: Manufacturer, Quality Assurance Definition EUT = Equipment Under Test. Equipment Needed: (1) CAT5 cable (straight through) (1) Project platform Device(EUT) (1) Computer with Media Player 11 program. (1) Linksys (CISCO) wireless Router (1) D-Link wireless Router (1) XXX Streamium product WAC7500 (1) XXX Streamium product WAS7500 WI-FI test Procedure: Connect the CAT5 cable from Router to computer. Double click the Windows Internet Explorer. At the screen key in “” click Enter(Refer to Picture 1) Come out a window requested the User name and password At the field key in ”admin” click Enter Picture 1 The screen will showing out “Linksys by Cisco” set-up manual(Refer to Picture 2) Picture 2 Click wireless and select basic wireless settings Select Manual, Enabled 5GHz wireless Settings and disabled 2.4GHz wireless Settings At 5GHz Wireless Settings window select Network mode at “A-Only” Network Name(SSID) key in “Project platform test Router” Standard Channel select at 36-5.180GHz and save the settings Click wireless security settings, security mode select to disable and save the setting(Refer to Picture below) At the Project platform Device(EUT) network setting, search for “Project platform test Router” Make sure the Project platform Device(EUT) and “Project platform test Router” is link together and able connected to the Internet Radio Change the Standard Channel to 40-5.200GHz and save the settings(Refer to Picture 3) Picture 3 At the Project platform Device(EUT) network setting, search for “Project platform test Router” Make sure the Project platform Device(EUT) an