Operations Manual Rk（操作手册 Rk）.pdf

RRKK22 SYSTEMS SAN DIEGO, CA RK10AC-PF PROTEIN FRA CTIONA TOR Operations Manual RK2 10 AC Protein Fractionator I. Introduction II. Tools, parts and hardware III. Unpacking procedures IV. Assembly procedures V. Appendix: Components I. Introduction Congratulations on your purchase of the RK2 10 AC Protein Fractionator. This sophisticated filtration system is recommended for aquaria of up to 1000 gallons, and, when operated and maintained correctly, will provide many years of service, clean water, and health for aquatic life systems. Should any technical issues arise during assembly or operation of this unit, please contact your RK2 Systems Distributor. II. Tools, Parts and Hardware The RK2 10 AC is simple to assemble, with only a few tools necessary and very few nuts, bolts and washers to keep track of. Tools Supplies Needed: Flat head screwdriver One 1/4 “ open-end, crescent or socket wrench Box-cutter or similar blade One tube of Silicone Grease NOTE: Pipe wrenches are not recommended for assembly of the 10 AC and typically result in damage to the unit.) Hardware included: (For top assembly) Twelve 1/4” x 2” bolts Twelve 1/4” x 5/8” standard flat washers (For pump mount) Two 1/4” x 1.5” bolts Four 1/4” x 5/8” washers (For Reaction Chamber base) Four 1 1/4” x 1/4” bolts Four washers (SIZE?) III. Unpacking Procedures 1. Using the box cutter, remove plastic straps and plastic wrap from the RK2 10 AC box and pallet. HELPFUL HINT: The lid makes a useful tray to keep some of the hardware components together for assembly. 2. Using the flat head screwdriver, remove the staples from the bottom of the carton. 3. Lift the carton off the bottom of the box. 4. Remove the Top and Cone Assembly from the top of the unit an