How to configure the IP camera to be viewed （如何配置IP相机查看）.pdf

How to configure the IP camera and viewed through Internet when I am behind a router? Author: Longcent Author: Longcent (2006-11-16) (2006-11-16) This FAQ is applied to the below models and condition: This FAQ is applied to the below models and condition: IC-3000 / IC-3000Wg. IC-3000 / IC-3000Wg. Your ISP assigns you a Public IP address . Your ISP assigns you a Public IP address . Introduction: Introduction: This FAQ is for guiding you to configure your IP camera to be viewed by others over the Internet if you are using a router to share the Internet access. As shown in Figure-1, the PC-B can view the IC camera over the Internet using the web browser. Configuration steps: Configuration steps: Step1. Ensure the PC-A is able to access the Internet via the router. Step1. Ensure the PC-A is able to access the Internet via the router. Step2. Write down the public IP of the router. We hereby assume that Step2. Write down the public IP of the router. We hereby assume that the router’s public IP is 4 . the router’s public IP is 4 . Copyright 2007 © EDIMAX Technology Co., Ltd. All Rights Reserved Step3. Configuration in the IP camera: Step3. Configuration in the IP camera: If you are using an Edimax router, it’s not required to change the default If you are using an Edimax router, it’s not required to change the default settings of the IP camera shown in the Figure-2. settings of the IP camera shown in the Figure-2. Just write down the default IP address, an