弘訊标准Q8操作手册_E_110222.doc

PXA270 _Q8 HMI Controller Software Manual Standard Version Techmation Co., Ltd. 9F, No.529 Chung Cheng Road Hsin-Tien City, Taipei Hsien Taiwan, R.O.C Telephone：886-2Fax：886-2E-mail：techmation@.tw Ningbo center Telephone：86-574 Fax：86-574E-mail：technbsevice@.tw Hu men center Telephone：86-769Fax：86-769E-mail：techhm@.tw Preface This book is the operation manual of PXA270 (Q8) system software hardware made by Techmation. It includes two parts: operation modes and operation menus. It will explain how to setup and preset the clamping unit, injection unit, product inspection, list files and network About the HMI panel, including every key function and HMI display, please refer to the part of operation menus. Warning: For safety precautions and general machine operation and maintenance you must refer to the machine manufacturer’s manual. This is essential to avoid serious injury to the machine operator and to prevent damage to the machine. Changing the machine setup and settings without proper care and knowledge can lead to damage to the machine. Liability: Techmation assumes no liability in any form for machine operation in connection with the use of this manual. It is your responsibility to ensure safe machine operations. Never operate the machine without proper training and instructions. Read both manuals first (the machine manufacturer’s manual and Techmations’s Controller Software manual) before attempting any operation of the machine. Please note that the information in this manual is subject to change without notice. For any further information, spare parts services, documentation product updates, general inquiries etc., please contact us at the following address: Techmation Co., Ltd. 9F, No. 529, Chung Cheng Road Hsin-Tien City, Taipei Taiwan, R.O.C. Phone: +886-2-2218 1686 Fax: +886-2-2218 1766 E-mail: techtp@.tw We sincerely hope that this manual will be a good helper due to the operation for our