先进材料表征技术-(II).ppt

  1. 1、本文档共38页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
先进材料表征技术-(II)

Advanced Technology for Materials Characterization (Part IV) By Dr. Yejun Qiu Characteristics: Time of flight (TOF): 100 °C (1 min) to 250 °C at 10 °C/min (Hold 4.00 min) for a total run time of 20 min. Oven Program: He at 35 cm/sec (constant flow) Carrier Gas Flow: 1 μL Injection Volume: Split (20:1) Injection Mode: 250 °C Transfer Line Temperature: 250 °C Inlet Temperature: Restek Stabilwax (30 m X 0.25 mm id X 0.25 μm df) with a 5 m retention gap (or equivalent) Column: Use 50% aqueous acetonitrile in the wash vials for cleaning the syringe between injections. This removes sample residue that may not be soluble in other wash solvents. This will reduce injector errors. Note: Alterations to the GC temperature program may be used to help overcome interferences. Significant additional resolution may be obtained by decreasing the temperature ramp over relevant portions of the chromatogram. This will alter retention times for the analytes and they would need to be re-established. GC Conditions 230 °C (Source); 150 °C (Quad) MS Temp: 4 minutes Solvent Delay: 100 Threshold: 2 (Scan Rate of about 4 scans/sec) Sampling Rate: 29 - 400 amu Scan Range: Standard Spectrum autotune Tune: MS Conditions (Full Scan Mode) a Start Times may need to be adjusted based upon the retention time of standards on your system. b Dwell times should be adjusted to produce a cycle time of about 4 scans/sec c Percent relative abundance with respect to the ion of highest abundance. d M is the Molecular Ion. 61 (100) 60 (13) 43 (78) 31 (40) 12.0 Glycerin 76 (12) 75 (24) 45 (100) 31 (11) 9.0 Diethylene Glycol 58 (68) 57 (73) 43 (22) 31 (100) 7.5 1,3-Propanediol 62 (M) d (4) 43 (8) 33 (35) 31 (100) 6.6 Ethylene Glycol 61 (5) 45 (100) 43 (15) 31 (11) c 4.0 1,2-Propanediol 4 3 2 1 Selected Ions b Start Time a (min) Group MS Conditions (SIM Mode).This is provided primarily for information only since it is unlikely that SIM will need to be utilized. There are a lot of potential interferences with th

文档评论(0)

yan698698 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档