IIS能力验证测试参数（石油产品）-实验室能力验证管理系统.doc

Page  PAGE 6 of 6 IIS能力验证测试参数 （石油类） Proficiency testing schemes for Petroleum and Petrochemical Products: Petroleum Products Internet: Product 产品名称No. of labs 实验室数量Provisional scope 测试参数Crude Oil100Density @15oC, API Gravity, Light Ends, Mercury, Pour Point, Salt, Sediment (D473 and D4807), Sulphur, Viscosity and Water. 15 oC密度，API燃油比重度数，轻馏分，汞，倾点，盐，沉淀物（D473和D4807），硫，粘度和水Crude Oil Assay20Composition D2892, Density and Sulphur on all fractions and selected parameters on some fractions, e.g. Smokepoint on the Kerosene fraction and PIONA on a Naphtha fraction. 组成D2892，测试密度和硫在所有馏分中和在一些馏分里选择参数，如煤油馏分的烟点和石脑油馏分的PIONA组成分析Gascondensate40Colour Saybolt, Density @15oC, distillation (D86), Mercury, Sulphur, Water and Vapour Pressure. 赛波特颜色，15oC密度，馏程（D86），汞，硫，水分和蒸汽压Hydraulic Fluid (used oil)35Density @15oC, Kinematic Viscosity @40oC and @100oC, Total Acid Number, Flash Point PMCC, Organic Halogens (extractable and total, Water and 18 elements (wear metals: Al, Ba, Cr, Cu, Fe, Li, Mg, Mn, Mo, Na, Ni, Pb, Sn, Si, V and additives: Ca, P, Zn). 15oC密度，40oC和100oC运动粘度，总酸值，闭口闪点，有机卤素（可分离的和总的，水分和18个元素铝，钡，铬，铜，铁，锂，镁，锰，钼，钠，镍，铅，锡，硅，钒和另外的钙，磷，锌）Lubricating Oil (unused)100Total Acid Number, Total Base Number, Ash (Sulphated), Colour, Conradson Carbon Residue, Density @15oC, Flash Point COC, Flash Point PMCC, Kinematic Viscosity @40oC and @100oC, Viscosity Stabinger @40oC, Nitrogen, Pour Point, Sulphur, Water and 3 additives: Ca, P, Zn. 总酸值，总碱值，硫酸盐灰分，颜色，康氏残炭，15oC密度，开口闪点，闭口闪点，40oC和100oC粘度，氮，倾点，硫，水分和3个添加剂钙，磷，锌。Lubricating Oil (used)100Total Acid Number, Total Base Number, Density @15oC, Flash Point PMCC, Kinematic Viscosity @40oC and @100oC, Water and 19 elements (wear metals: Ag, Al, Ba, Cr, Cu, Fe, Li, Mg, Mn, Mo, Na, Ni, Pb, Sn, Si, V and additives: Ca, P, Zn). 总酸值，总碱值??15oC密度，闭口闪点，40oC和100oC运动粘度，水分和19个元素（金属磨损：银，铝，钡，铬，铜，铁，锂，镁，锰，钼，钠，镍，铅，锡，硅，钒和添加剂钙，磷，锌）。Naphtha100Colour Saybolt, Copper Corrosion 3hrs @ 50oC, Density at 15 oC, Distillation (IBP, 50% recovered,