C0mp0ser使用方法.pptVIP

Composer(贝利组态工具)的 使用方法;Composer 概 述;Composer 的软件组成;Composer 的软件组成;硬件平台要求;Composer的结构;Composer的窗口结构;Composer的窗口结构;建立新项目;控制器组态的步骤;Open a New Composer Project Create Border Information Add a Node to Control Network Add a Control Unit Add a Console Add a HAC Add a SEM Add a controller Add a Control Logic Document Add a Display Group to a Console (for C-VMS) Add Lists to Project;Add a controller;通信组态;;计算机与控制网络的通讯有两种情况。一种情况为：计算机为物理连接到控制网络的服务器；另一种情况为：计算机组态为一客户端（Client），通过通讯服务器与控制网络通讯。;连接到控制网络 巡检Control Unit Address of Controller Type of Controller Firmware Revision Function of the Controller (Text Description) Mode Status of the Controllers;自动化结构（Automation Architect ）;Shapes, macros, borders, and control logic templates can be created and saved to a user-defined exchange folder. To create a shape, macro, border, or control logic template: 1. Create a new, or open an existing, exchange folder. 2. Right click empty space in the exchange window. 3. Select New Shape, New Macro, New Border, or New Control Logic Template from the pop-up menu. 4. Enter a name on the general tab of the property page. 5. Click OK. The shape, macro, border, or control logic template appears in the folder directory listing. 6. Right click the new shape, macro, border, or control logic template. 7. Select Open from the pop-up menu. 8. Configure the shape, macro, border, or control logic template from the beginning or copy and paste entities from other control logic documents. 9. Select Save from the file menu. 10. Select Close from the file menu.;编译,下装,存盘,校验,监视与调整;在线组态;人系统接口各种列表组态; 应用实例（Application）?例： 已知某300Mw机组除氧器压力系统，有3 个模拟量输入，除氧器出口压力0~1.6Mp，四段抽气压力0~1.6Mp，以及除氧器压力调节阀位反馈信号（0~100%），要求实现自动控制，并能保证手/自动无扰切换，当信号不准及输出指令与阀门反馈信号偏差太大时切为手动方式运行。?;1 、信号采集 由于有3 个AI及AO且要完成控制功能故选择一个CIS即可。 CCS硬件地址选为25 ，FC79的S1=15 根据AI信号量程确定FC79的参数 AI1：位置反馈 S2: 100 S3 : 0 AI2：四段抽气压力 S4 :1.6 S5 : 0 AI3：除氧器出口压力 S6 :1.0 S