发电机MAN L1624-.pdf

0 8 0 2 8 - 0 D /H 5 2 5 0 /9 4 .0 8 .1 2 500.40 Edition 06H L16/24 Data for Tightening Torque Description Page 1 (8) 03.36 - ES0 Lubricant M MH O XX ° L Note: For tightening bolts to a specified torqe, only use the specified lubricants. For component tem- peratures p to 200°C, e.g. Molykote Pasta d or Optiuoly Paste White-T. For component tempera- tures above 200°C, e.g. Molykote Paste HSC or Copa Slip. Coefficient of friction 0.08 - 0.12 Coefficient of friction 0.08 - 0.12 Lubricating paste up to 200°C High temperature lubricating paste above 200°C Oil Screw in with Loctite 243 until it sits squarely Angle when slackening Number of holes by which the nut must be turned back Tab. 1. Oil Screw-in Tightening Working Screw Connection pressure moment torques Card Figure Bar torsions angle 012 Cylinder Crankcase 012-1 Cap main bearing / 1200 HAND/hand-M M 510-01.05 Cylinder crankcase Loctite 243 012-2 Cap main bearing / 200 HAND/hand-M MH 510-01.05 Cylinder crankcase 1200 HAND/hand-M MH 510-01.05 012-3 Crankcase / 1200 MH 505-01-55 Cylinder head 020 Crankshaft 020-1 Crankshaft / Counter 1200 45-M weight 020-2 Gear wheel 100-M (two parts) 020-3 Gear wheel / 100-M Crankshaft MAN BW Diesel 0 8 0 2 8 - 0 D /H 5 2 5 0 /9 4 .0 8 .1 2 Oil Screw-in Tightening Please see Screw Connection pressure moment torques Working Figure Bar torsions angle Card 500.40 Edition 06H L16/24 Data for Tightening Torque Description Page 2 (8) 03.36 - ES0 027 Vibration Damper 027-1 Gear wheel / Damper 1. step 450-M 510-04.00 2. step +60 027-2 Side / Disc 45-M 030 Connecting Rod 030-1 Connecting rod shaft / Con- 1200 M 506-01.25 necting rod cover 506-01.15 506-01.30 034 Piston 034-1 Piston 506-01.10 034-2 Piston 506-01.10 MAN BW Diesel 0 8 0 2 8 - 0 D /H 5 2 5 0 /9 4 .0 8 .1 2 Oil Screw-in Tightening Please see Screw Connection pressure moment torques Working Figure Bar torsions angle Card 500.40 Edition 06H L16/24 Data for Tightening Torque Description Page 3 (8) 03.36 - ES0 056 Mounting of Fuel I