学位论文___支架冲压工艺与模具设计.docVIP

目 录 引言 3 1 工艺分析和工艺方案确定 5 1.1冲压模的分类和结构型式 5 1.2冲模设计的步骤和内容 6 1.3设计任务 7 1.4工艺性分析 8 1.5 9 1.6模具 12 2 级进模总体结构设计 1 2.1级进模总体结构方案 1 2.2排样设计 1 2.3冲裁力和压力中心计算 1 2.4压力机选择 18 2.5刃口尺寸的计算 19 3 弯曲模总体结构设计 31 3.1模具总体方案设计 31 3.2弯曲力计算 31 3.3弯曲模刃口尺寸计算 31 3.4模具零件的结构分析 33 4 级进模零件设计 4.1工作零件的结构设计 4.2导向零件和紧固件的选择 4.3选择坚固件及定位零件 34.4出件和卸料方式的选择 37 4.5模架类型的选择 37 4.6模柄的选择 38 结论 致谢 参考文献 摘 要 模具通过对该模具零件的设计，进一步 本课题研究的冲压模具的设计，通过对工件的分析比较确定采用模进行生产。模的生产率，，对是有的。 本课题的内容包括排样设计、凸模设计、凹模设计、冲裁力计算、冲压机构的选择、压力中心的确定，模具刃口尺寸确定等，并对各个进行了详细的计算。保证部件的配合。 关键词： 模具设计；冲压模具；模Abstract Mold plays in contemporary industrial development a very important role, mold industry has a strong push in the social advancement and development of national industry. The design of the mold parts through further training a designer integrated use of multi-disciplinary theories and to create, the ability to solve practical problems encountered in the production of too much trouble. The research stent precision stamping die design, through analysis and comparison of the work piece is determined using progressive die, bent mold production. Progressive Die adoption benefit is that the work can increase productivity and save manpower, material resources, can be automated machining as soon as possible. Coupled with the higher feed-processing operation at a convenient time, to ensure the safety of construction workers, more suitable for mass production. However, we must consider the use of progressive die strip of pinpoint problems, as well as progressive die structure complex work piece machining time is longer, higher processing costs of the work piece and other issues. Therefore, every reason for a comprehensive, targeted to carry out progressive die, bent to explore research topics are particularly valuable. The contents of this subject includes determining progressive die and bending die strip layout, punch design, die design, punching force calculation, select the punching mechanism to determine the pressure center of stamping die edge siz