毕业设计计算书_湖南长沙育才中学教学楼全套.doc

本科生毕业设计（论文） 湖南长沙育才中学教学楼 学 院（部）： 土木工程学院 专 业： 土木工程 2010年6月 摘要结载设计规GB50009—2001）、《建筑抗震设计规范》(GB50011—2001)、《建筑地基基础设计规范》（GB50007-2002）、《混凝土结设计规GB50010—2002）、《建筑结构制图标准》( GB/T 50105-2001)，并按毕业设计任务书的要求且基于AutoCAD、天正建筑、PKPM等专业软件完成的。设计内容包括建筑设计、结构设计、施工组织设计三大部分。设计成果主要包括建筑方案的确定、建筑平面、立面设计、结构平面布置及选型、框架结构的计算、基础和楼梯的计算、施工进度计划的制定、施工组织设计方案的确定，手工绘制的一榀框架和基础的结构施工图，电脑绘制的建筑施工图、平法结构施工图、基础和楼梯施工详图、施工网络进度计划图、施工组织设计总平面图等。按照结构计算过程及毕业设计文本格式要求编制了结构计算书。设计深度和广度达到了《毕业设计任务书》的要求。本设计建筑功能齐全，结构安全、合理，施工布置及进度安排合理。 关键词：建筑设计,结构设计，施工组织设计,内力计算，内力组合，配筋计算 ABSTRACT This design was accomplished according to the Load code for the design of building structures (GB50010-2002), Code for seismic design of building (GB50101-2001), Code for design of building foundation (GB5007-2002) , Code for design of concrete structures (GB50009-2002) , “Standard for structural drawings”(GB/T 5105-2001), and in accordance with the requirement of the “book of design task”, and by means of use of the professional design software such as the AutoCAD2004，TC7.0、 etc. The contents of design include the design of architecture, structure and construction schedule. The main results of design contain the architectural program determined, the architectural plane design, the architectural elevation design, the structural layout selection, the artificial calculation of a frame structure and artificial calculation of a foundation and a stairs, the construction schedule formulated, design of constructional arrangement, the structural construction drawings done by hand for a frame and a foundation, the architectural construction drawings and the structural construction drawings and the detail drawings of construction and drawings of network plans of construction and the total plane drawing of constructional organization design by means of computer. the “calculation book” was drawn up according to the calculation proc