TEAMB衬里管道安装方案.doc

Content 目录 1. Generation 工程概况 2 2. Reference 施工依据 2 3. Piping installation precondition 管道安装条件 3 4. Material acceptance 材料的验收 3 5. Material release and control 材料的领用与控制 4 6. Piping installation 管道安装 5 7. QC Plan质量控制计划 16 8. construction safety and civilization安全与文明施工 17 Generation 工程概况 This method statement is prepared for Dow Corning Asia third pillar project phase II Team B of area B1(A21 A24), B2(A35 A36 A40) site lining pipeline installation work.. lining pipe is 3858m in these specific area. 本管道工程主要是道康宁亚洲第三支柱项目第二期项目TEAM B(B1(A21 A24) B2(A35 A36 A40))的衬里管道的现场安装工作。安装工作量:衬里管道约为3858米(包括PTFE、PVDF、PGL及钛衬里)。 Reference 施工依据 Process pipe layout, ISO drawings工艺管道布置图，单线图 0136-OBJ-100014013 Specification for erection of metallic work 0136-OBJ-100014013 金属管安装规范 0136-OBJ-100210004 ZJG Standard for Painting and Protective Coatings 0136-OBJ-100210004 管道油漆和保护层标准 0136-STD-100710003 Pipe Support Standard 0136-STD-100710003 管道支架标准 0136-STD-100270006 Flange tightness procedure 0136-STD-100270006 法兰紧固程序 0136-STD-100795812 Care Protection Procedure 0136-STD-100795812 成品保护程序 Industry metal pipe construction and acceptance specification GB50235-97《工业金属管道工程施工及验收规范》 GB50235-97 Industry metal piping construction quality inspection and acceptance specification GB50184-93《工业金属管道工程质量检验评定标准》 GB50184-93 Industry equipment, pipe anti corrosive construction and acceptance specification HGJ299-91《工业设备，管道防腐蚀工程施工及验收规范》 HGJ299-91 Process piping specification ASME B31.3 and ASME B31.1《工艺管道规范》ASME B31.3及ASME B31.1CRANE (ASIA PACIFIC) PTE LTD INSTALLATION AND MAINTANCE CRANE (亚太) PTE 公司的安装及维护手册 Piping installation precondition 管道安装条件 All the civil, mechanical and steel structure related to the piping is inspected and satisfied with the requirement. 与衬里管道安装有关土建、设备及钢结构工程已检验合格，满足安装要求。 Design drawing and other technical document is complete and all the drawing is inspected.  设计及其它技术文件齐全，施工图纸已汇审。 Construction method is approved, all the party both